Μόνο Εξουσιοδοτημένοι

Εξουσιοδοτημένοι συνεργάτες μπορούν να δουν τιμές και να κάνουν παραγγελίες.
» Είσοδος

Νέοι Συνεργάτες κάντε αίτηση σήμερα με
» Για να αιτηθείτε συνεργασία

Η εταιρία μας θα λάβει την αίτηση σας και θα σας απαντήση σύντομα

Κατηγορίες

Κατασκευαστές

Διαφήμηση
Αναβαθμίσεις  Miracle
Σας ενημερώνουμε για τις αναβαθμίσεις της MIRACLE-A9 Premium αναβάθμιση λογισμικού 8.15.1
Μοντέλο: Miracle-A9 Premium
Ημερομηνία: 8 Αυγούστου 2016
Έκδοση: Software 8.15.1

'MIRACLE-A9 Premium' αναβαθμίσεις :
- H διασύνδεση χρηστών βελτιώθηκε
- Αναβαθμίστηκε ο server και η σταθερότητα του λογισμικού
- Χειροκίνητη κοπή: Προστέθηκε η επιλογή για κοπή TOY48
- Οι ρυθμίσεις για την φωτεινότητα της LCD και του ήχου για το κουμπί μπορούν να ρυθμιστούν
- Διορθώθηκαν μικρά σφάλματα
- Προτέθηκε εικόνα για τον αντάπτορα του κλειδιού

Επίσης μπορτέθηκε στο λογισμικό νέα δεδομένα :
Προστέθηκαν τα προφίλ
162
Add Mfg & model & series
Vauxhall
10, 1024, 1025, 1097, 124, 132, 147, 155, 156, 159, 16, 160, 162, 164, 165, 186, 21, 232, 74, 810, 91,
Όλες τις χρονολογίες
Monaro VXR
2004~2006 (IC Card:810)
Vivaro
2002~ (IC Card:1024)
Peugeot
Expert
Όλες τις χρονολογίες(IC Card:1047)


Σας ενημερώνουμε για τις αναβαθμίσεις της MIRACLE-A9 και MIRACLE-A9 Premium:
Miracle-A9 / Miracle-A9 Premium Update News: Software 8.14, Firmware 7.81

Μοντέλο: Miracle-A9 / Miracle-A9 Premium
Ημερομηνία: 9 Ιουνίου 2016
Εκδόσεις:
Miracle-A9: Software 7.75, Firmware 7.81
Miracle-A9 Premium: Software 8.14, Firmware 7.81

Πρόσφατα προστέθηκε λίστα κλειδλων
UNFP
UNFT
UNFS
AF5I
AF5D
AF6I
AF6D
AF7I
FOFR
FOD
LFWB
CEMJC
CEMBP
LFRO
LF1
UCEM-8D
AMG9D

Νέες προσθήκες στην λίστα καρτών προφίλ IC
87
112
117
122
129
130
136
137
140
144
145
149
150
151
153
154
155
159
164
165
179
183
184
195
202
209
223
232
285
342
363
364
380
450
458
463
469
475
493
522
1086
1087
1088
1090
1091
1113
1418
1630
1631
1635
1744

Προστέθηκαν στην λίστα των κλειδιών MFG
Agrati Garelli
Alfa Romeo
Arman
Astra
Austin Healey
Austin-Morris
Autobianchi
Bedford
Bloster
British Cars
British Leyland
Casi
Cem
Cromodora
Daimler
Disalcar
DOM
Ducati
Ebro
Farma
Ferrari
Fiat
Fist
Ford
FSM
Giobert
Huf
Innocenti
Iveco
Jaguar
Jensen
Kia
Lada
Lamborghini
Lancia
Land Rover
Lotus
Malaguti
Mazda
MG
Moto Guzzi
Neiman
Normbau
Opel
Piaggio(Motorcycle)
Ramis
Safe
Sipea
Sperrkolb
Sterling
Steyr-Puch
Triumph
Union
Vespa
Volkswagen
Volvo
Waso
Wilmot Breeden
Ymos
Yugo

Ενημερωτικό 23 Φεβρουαρίου 2016

Είμαστε σε ευχάριστη θέση να σας ανακοινώσουμε τις νέες αναβαθμίσεις και για την μηχανή MIRACLE-A9 Premium,
Έκδοση λογισμικούSoftware 8.13 και Firmware 7.81.

Αλλαγές:
- Βελτίωση για την λειτουργία προεπισκόπησης
- Βελτιώθηκε η λειτουργία My Key Info" (Δημιουργία κλειδιών)
- Προστέθηκε χειροκίνητη λειτουργία για την κοπή κλειδιών ώς "Manual Cut".
- "Remote Support" κουμπί στην οθόωη για τεχνική υποστήριξη.
- Μερικά μικρά λάθη διορθώθηκαν : καλύτερη σταθεροποήση στον πάγκο, διόρθωση στα λάθη του λογισμικού
- Προστέθηκαν στην βάση δεδομένων οχήματα και κλειδιά οικειών
Πρόσφατα προστέθηκε η βάση δεδομένων για κλειδιά :

Cisa Astral CS62(6+7)
Abus D6 (6P)
Abus D6X (6P)
AGB Scudo 5000 (7P)
Corbin Eurostart (6P)
Ifam F11SX(6+5+5)
Corbin Euroval(5P)
Cisa Asix(6P)
Dom DM58(6+5)
Dom DM24 IX(5+5+5)
Dom IX6 KG (pf.093/121)
Domus DS6(5+4)
Ala DS6(5+5+3)
Blinky(6P)
Basi CX6 Right(6P)
Securital PSei
Mottura Defender (6P)
Basi CX6a (6P)
Meroni M4 (2T-6W)
Mg HS(5+5+5)
MG X8 (5+4)
Moia DX (4+7+3P)
DeFort-Unity Lock(5P)
Mul.T.Lock(9mm-L)
Omec CHV019(6+5)
Omec OC4 (6P)
Prefer S810(4+4)
Prefer UL20(6P)
Potent Secur S34(6P)
Securemme K2(5+5)
Kyr(4P-L)
Kyr(4P-R)
Kyr(4P-L) New
Kyr(4P-R) New
Kyr(4+3)
Kyr(3+4)

Ενημερωτικό 18 Οκτωβρίου 2015

Νέα μέγγενη - ​Abloy Key clamp

Είμαστε σε ευχάριστη θέση να σας ανακοινώσουμε την νέα μέγγενη Abloy που σας επιτρέπει την κοπή κλειδιών Abloy.
Abloy Key Clamp (CP-102): Για τα κλειδιά Abloy
- Συμβατότητα με μηχανές : Miracle-A9 και A9 Premium

Νέα μεγγενάκια - VA2 Adapter και SX9 Adapter


Αυτά τα νέα έα μεγγενάκια - VA2 Adapter και SX9 Adapter μπορούν εύκολα να τοποθετηθούν και να αφαιρεθούν από την βασική μέγγενη Automobile key clamp.
SX9 Adapter (CP-108) : Για τα κλειδιά SX9
VA2 Adapter (CP-109): Για τα κλειδιά VA2
- CΣυμβατότητα με μηχανές : Miracle-A4, A5, A6, A9 και A9 Premium

Ενημερωτικό 7 Ματρίου 2015

Η Miracle-A9 μπορείτε πλεόν να χαράζει κλειδιά με την νέα μέγγενη και το νέο μαχαίρι
V-cutter(T60-MC00-45)
Key marking clamp (CP-107)

Ενημερωτικό 4 Φεβρουαρίου 2015

Τώρα στο πρόγραμμα WH Software κυκλοφόρησε η αναβάθμιση για την “Miracle”. H "Miracle" περιλαμβάνεται στην λίστα των μηχανών του προγράμματος InstaCode. Έτσι η επικοινωνία μεταξύ Instacode και "Miracle" είναι διαθέσιμη.
(Menu -> Help -> Check for Program Update in the InstaCode, η έκδοση Android version αναβαθμίζεται αυτόματα.

Πλέον είστε ικανοί και να αποκωδικοποιήσετε κλειδιά επιλέγοντας το Instacode και χρησιμοποιώντας την "Miracle". Για αυτό αναβαθμίστε το InstaCode!

- Android έκδοση InstaCode
Το νέο update version 7.72 κυκλοφόρησε!
Version: 7.72

Αλλαγές:
- Software Version:7.72, Firmware Version: 7.72
- Bitting number inverting feature added (On "Bitting Input" screen)
- Tecon, TC6 added
- Showa X-Key New fixed, X-Key [U-Shin] added
- MIWA U9 fixed
- Viro Euro-Pro added
- Potent Secur added
- Prefer S810 added
- Omec CHV019, OC4 added
- IFAM F11SX added
- Brisant key cut fixed
- More HON66, IC Card 1341 added under Honda
- BMW/Mercedes/Alfa Romeo/Citroen car models re-organized
- Nissan Juke/Note added
- Peugeot 301/501/5008/2008/RCZ added
- Chevrolet AVEO 2011~ added
- Ssangyong Actyon, Rexton added
- STS/TESA ST6 data fixed
- Calibration process is automatically followed after firmware upgrade

10/17/2014

Version: 7.65

Shoulder aligned single-sided key cut error fixed
Magnum/M&C cut is now improved
CVL/UCEM added
Domus DS6 added
KESO 4000S Custom fixed
Corbin Eurostar added
SX9 is cut at stopper #2

9/29/2014
Date of release: 29 September, 2014

What`s new in 7.6 version.
The new update 7.6 version comes with new data, as well as adding completely new functions to Miracle-A9. Some of these new features including: security setting, key marking and the capacity for the user to make his own data.
Below is this complete of the changes made in this upgrade:
Touch Console Software
1. Feature of user key profile creation added. (Data creation)
2. Engraving feature added. (Optional clamp for engraving feature will be released at the same time.)
3. Items in "Cut History" and "Favorites" may be deleted from memory.
4. Two buttons added on "Search" screen for easier selection of search target.
5. "[All]" button has been on key "Selection" screen to show all keys under specific dimple or standard key manufactures.
6. Limitation to selecting stop guide position depending on the key length removed for channel track laser key like HU83, HU92 etc.. (Now, HU83 (IC Card: 1286) with long inner groove can be cut at stop guide position #2)
7. Password creation is now on option to prevent the unauthorized use (Once it's set, the password input screen is the first to appear after boot-up.)
8. Users can now register their own barcode. (Through key loaded screen -> "MENU" -> "Add Barcode" button)
9. Recommended cutter or decoder information now pops up on cut or decode option screen.
10. Key cut speed, measurement, Z pitch options are now available among listed buttons.
11. Dimple key doesn't show cutter diameter information, while the cutter diameter is being selected by the arrow button for the other keys.
12. The "Move" button has been added to the clamp calibration screen in order to move the clamp on the screen.
13. The "Version" button has been added to "Setup" screen to show the version of the device.
14.The one Pass cut, Z Pitch, Cut Depth buttons appear initially on laser key cut option screen as the laser key is loaded.
15. The "X" button has been added to "Biting Number Input" screen when the dimple key is loaded, to designate no-cut-position in specific keys like MIWA.
16. Magnum/M&C key cut capacity is now supported.
And, minor flaws have been debugged.

Firmware
1 Method way of cutting the tip of laser keys have been changed to a smoother and faster technique.
2. Magnum/M&C key clamp is now supported.
3. VO4(Double sided key with different space on side A and B) is now supported.
4. The method of cutting a dimple key has been changed to cut spirally. (So now, the cutting noise has been reduced, and a worn cutter can cut the dimple better.)
5. The problem of dimple key decoding/cutting at the deepest dimple has fixed.
6. EZCURRA SEA20/23, two row inward laser key is now supported.
7. Key way with constant angle(not constant width as conventional automotive keys) supported. (for Single sided key, inward groove for Magnum etc.)
8. And minor bugs has been fixed.

Newly Added Key Information
1. Mul-T-Lock MT5
2. Magnum
3. M&C
4. STS ST6
5. FAG
6. EZCURRA SEA20/23
7. CISA Astral S/Astral
And many others.

* This update is applicable only to the Miracle-A9.
* This update is available on the "Portal to Miracle".
* More details about these updates will appear in upcoming Newsletters.

Newsletter 4 September 2014
9/3/2014

How to use the spacer
When the key is too thin such as a laser key, you can use a spacer for raise the height of the key.

Picture
Like as above, Insert the spacer (SP-93) under the key then secure the key.For more information about these, please refer to the below video. .


Newsletter 28 MARCH 2014
3/27/2014

Magnum Key Clamp
Picture
Now the Miracle-A9 is available to install the Magnum Key Clamp.
Please don`t hesitate to contact us, if you have any questions about this.
Key Data Update
[24 March, 2014]
- MIWA PR, PS added
- Lockman MegaCross added
- Royal Guardian added
- AGA, SAG turular key added
- TOY47 key cutting error fixed by firmware fix(version 7.12)
- SX9 Side A center measurement error fixed by firmware fix(version 7.12)
- Kimco, Tata, Neiman added
- More information under CISA added
- GeGe 4,5,6,7 cut information added
- Brisant added
RED TECHNOLOGY TEL: +82-70-7011-0905 info@iredt.com
Copyright(c) 2005-2014 RED TECHNOLOGY. All rights reserved FAX: +82-42-673-0905



Newsletter February 6, 2014
2/6/2014

Picture
Newsletter From REDT
6 Feb, 2014
Announcing!!! New Products!
Picture
Picture
We are happy to announce the addition of the following two new products to our line: The Miracle-A4 and The Miracle-A6.
To better help you understand the features of these products, as compared to our present line (A5 and A9). See the product page or comparison chart. Please don`t hesitate to contact us, if you have any questions about these.

Newsletter September 27, 2013

27th September, 2013
Improvement in the Miracle-A9
we have added new features to the Miracle-A9 as shown in the following videos.
Please contact us for any questions about these new features. We are more than happy to answer of your any questions.

*Applicable for the Miracle-A9 with firmware version 7.0 or later.
- You can download and update your Miracle-A9 to the version 7.0 by using "Portal to Miracle" software which is available for download on the download page.
Click here to go to the download page.
Coping Domestic(House) Key without Key Type Selection (Miracle-A9)

Show or Hide Manufacturer List

Built-in Tool Tray
We have updated the tool tray for the Miracle-A9 as shown in the picture.
- Built-in tool tray is provided for easy storage of parts such as the cutters, decoders and


Newsletter 15th March, 2013
3/14/2013
Mul-T-Lock Key are Available with Miracle A9

We finally succeeded in the Mul-T-Lock Key cutting by using new tools.
The both decoding and cutting are available with the Miracle-A9.

Now the tools are ready for order!
Mul-T-Lock Decoder
Mul-T-Lock Cutter

*Applicable Machine is Only A9.


Newsletter 5th February, 2013
2/4/2013
Portal to Miracle
We are pleased to announce that the new upgrade system "Portal to Miracle(Beta)" is about to be released.
This new software offers easier upgrade feature and user-friendly interface for the update of the console software for the Miracle-A9, SD memory for the Miracle A5 and A7 and the PDA software.

The follows are summary of the new features:
1. User friendly interface.
2. Updates all the Miracle product with single interface.
3. Provides new product and update information.
4. Feedback from customers.

The followings are features that will be offered in the near future:
1. Key cutting capability like CodeMaster 5
2. Customer management capability
3. And some others (Please give us some feedback for new features needed)

Operating System:
Window XP, Vista, 7, 8 (with Microsoft .NET 3.5 or above)

Download Link:
http://www.microsoft.com/en-us/download/confirmation.aspx?id=21

*** If this software doesn't run in the Windows XP,
Please install Microsoft .Net Framework 3.5 from the following link.
http://www.microsoft.com/en-us/download/confirmation.aspx?id=21

Newsletter 24th December, 2012
12/24/2012

Engraving padlocks by the Miracle-E2
http://www.redt-miracle-key.com/miracle-e2--engraving.html

Love padlocks (also known as love locks and, in Taiwan, wish locks) are a custom by which padlocks
are affixed to a fence, gate, bridge or similar public
fixture by sweethearts at an increasing number of locations in the world to symbolize their everlasting love.


-From Wikipedia, the free encyclopedia
http://en.wikipedia.org/wiki/Love_padlocks
Love Padlocks affixed at the N Seoul Tower

Engraving keychains by the Miracle-E2
Picture
Keychain is an promotional gift idea or selling items for customers who visit shop. Shop name, contact information or custom message will be engraved on the key chain to be used for promotional purpose or as a on-the-spot custom marking service.
Indelible letters, logos, photos can be engraved on the any kinds of metal surface with the Miracle-E2.
This engraving can be also applied to the engraving of padlocks, key blanks etc..


Update (June 11, 2012)
6/11/2012
- YM15/HU72 tip shape changed
- MIT6/X263 added under Mitsubishi
- GM18/B69 added under GM and Chevolet
- YM30 added under Maserati
- G27 added under Chevolet
- HU74 added under Land Rover
- VA6 added under Renault and Toyota
- Volvo S40 added
- WAS13 added under Jaguar


Update (March, 2012)
3/2/2012

- BMW HU100R added
- Hyundai HYN14, HYN15 added
- Mazda MAZ14 added
- VAC102 tip shape changed
- GM Ilco B62 added

Δεν υπάρχουν προϊόντα σε αυτή την κατηγορία.