AVDI DIAGNOSTIC INTERFACE + basic package

AVDI

The ABRITES Vehicle Diagnostics Interface (AVDI) is the latest version of our interface that allows the connection between our state-of-the-art software and your vehicles. The AVDI is the basis upon which the whole ABRITES products ecosystem is founded. On this basis you can build a bespoke package of solutions tailored to your needs. The basic package will give you access to a vast array of functionalities that will allow you to enter the world of automotive diagnostics with a minimal investment. Additional purchases will allow you to cover a range of functionalities that is often unmatched by OEM tools.

Each AVDI includes an Annual Maintenance Subscription (AMS) and Support Plan Service (SPS) for the first year of use in order to make sure that you get the full AVDI experience straight away. The AMS allows receiving the latest updates on the AVDI diagnostic software, and the SPS guarantees swift and effective technical support from our team of experienced professionals.

Furthermore, you will be able to perform basic diagnostics to all supported brands - Audi, Volkswagen, Seat, Skoda, Bentley, Lamborghini, BMW, MINI, Rolls Royce, Renault, Dacia, Mercedes-Benz, SMART, Mitsubishi, GM, Peugeot, Citroen, Opel/Vauxhall, Porsche, Honda, Ford, Mazda, Jaguar, Land Rover, Toyota, Lexus, Volvo, FIAT, Alfa Romeo, Lancia, Jeep, Subaru, Nissan, Infiniti, Chrysler, Dodge, Kia, Hyundai, Suzuki, Daihatsu, DAF, Aprilia, BMW, Bombardier Recreational Products and others.

The basic diagnostics that can be performed to all brands listed above are as follows:

Complete vehicle scan

Module identification – see all modules in the vehicle, complete with VIN and part numbers (where applicable)

Reading and clearing diagnostic trouble codes (DTCs)

Live data display – see live data from the sensors in the vehicle in real time

Actuator testing – identify any possible issues in the car by performing actuator tests

What’s more, all owners of AVDI receive the PassThru driver, which is an invaluable tool allowing you to work with original equipment manufacturer software (OEM), when necessary as well as a vast array of special functions allowing them to get the full experience of our products straight away. You can find details of those by brand listed below.

The J2534 PassThru driver is compatible with the international SAE standards, and emulates different interface units in order to access 3rd party software products. This means, that you can access original equipment manufacturer products and work with them via AVDI, no need for additional tools. It saves time and expenses, leaving you and your customers happy.

 

PASSTHRU COMPATIBILITY

BMW - DIS over K-line and CAN bus

BMW - E-Sys, INPA, EDIABAS, NCS Expert, NFS over K-line and CAN bus

BMW Rheingold ISTA-P

BMW  

MINI    

Bombardier diagnostic software

Mercedes DAS/Xentry - Star Diagnosis

Mercedes    

Evinrude Diagnostics

Fiat EXAMINER

FCA  

Ford Scanner

FORD  

GM - Tech2Win, GDS2 and SPS diagnostic software

GM  

Honda/Acura HDS

HONDA    

Hyundai/KIA GDS

HYUNDAI  

KIA    

Jaguar Land Rover Symptom Driven Diagnostics (JLR SDD)

JAGUAR    

LAND ROVER

Mitsubishi MUT3

Nissan Consult III+

NISSAN  

Land Rover/Jaguar IDS

Subaru Select Monitor III

SUBARU  

Suzuki/Yamaha Marine Diagnostics

Toyota/Lexus/Scion Techstream

TOYOTA    

LEXUS  

Volvo VIDA

VOLVO  

VW/Audi/Seat/Skoda/Bentley/Lamborghini ODIS

VW    

AUDI 

SKODA  

SEAT  

BENTLEY    

LAMBORGHINI    

Webasto TT

VCI emulator which enables AVDI to emulate different interface units (e.g. K-line interface and ELM327 interface)

VAG

Complete vehicle diagnostic scan

Read and clear diagnostic trouble codes (DTC)

Display live values from the modules of the vehicle

Perform Input/Output actuator tests

Enable and disable actuators

Access and perform Basic Settings

Calibrations (e.g. steering angle calibration)

Scan all units or separate one, access scan reports in a printable format

Diagnostic channel adaptations

Key programming by channel if the PIN is known

Guided functions for ECU, Instrument cluster, Navigation, Steering wheel, Electronic parking brake, Telephone, Comfort module and Body Control Module

Enable video in motion for MMI 2G and 3G

Steering lock adaptation

7-digit to 4-digit PIN conversion

DPF remove by DUMP – EDC16 (checksum needed), EDC17

Key programming, mileage calibration and module replacement in VAG Immo III and III+ vehicles

BMW

Reading and clearing DTCs

Full guide during the DTC procedures

Live data monitoring from multiple modules at the same time with multiple actuator activation

Actuator testing for all electronic modules

Generate/save/write complete Vehicle Order

Key learning if required security data (ISN) is present (ZN002 PROTAG or ZN003 PROTAG V2 is required)

EWS1/EWS2 key programming by EWS dump, using the ZN002 PROTAG or ZN003 PROTAG V2

EWS3 key programming using the ZN055 ABPROG EWS3 adapter and the ABPROG

CAS1/CAS2/CAS3/CAS3+/BDC key programming completely by OBDII (ZN002 PROTAG or ZN003 PROTAG V2 is required)

Disable transport mode

Change DME/DDE ISN

Disable /enable keys

Guided functions:

- Entering and exiting transport mode

- Service interval reset

- DPF Replacement

- DPF Regeneration

- Reset FRM short circuit

- Smooth running DME/ DDE setup

- EGS adaptation reset for ZF 8HP and 6HP

- Enabling parking brake workshop mode

- Injector calibration

- Starting Torque adjustment

RENAULT/DACIA

Reading and clearing of diagnostic trouble codes (DTCs)

Displaying of actual values (either numerically or graphically)

Actuator testing - ALL actuators can be tested separately.

Advanced – view and edit various configuration parameters

Scan report

Key programming for all vehicles up to 2014 (including Clio IV)

Key programming for the SMART 453/ Renault Twingo III

Module adaptation by VIN change

Change Radio code

Scan report

Advanced diagnostic – up to x95 (off line) ; up to Clio5 (on line)

    - Factory level coding

    - Change language

    - Dongle reset

    - many more

MERCEDES-BENZ/MAYBACH/SMART

Read and clear diagnostic trouble codes (DTCs)

Monitor live values

Perform actuator tests

SCN coding (e.g. DPF regeneration)

Service interval resets both for Assyst and Assyst Plus for most current models

Vehicle Identification

Module scanning

Custom session

Smart

-    SOFTOUCH activation - switching from semi-automatic to automatic transmission

-    Key programming – models 450, 451, 452, 454

-    Key programming for the SMART 453/ Renault Twingo III

-    Emergency start – models 451, 454

-    Mileage calibration – both SAM module and instrument cluster

-    Gearbox adaptation

-    Cruise control activation

-    Reflashing and renewal of SAM module and SAM/ECM synchronisation

 

Mercedes-Benz

-    Key programming by dump (DAS 2/2a/2b/ DAS 3)

-    Cluster calibration and adaptation for vehicles up to 2014

-    SCN coding completely by OBDII (no Xentry online account is required)

-    CPC modifications by OBDII:

      VMAX limiter removal

      Exhaust flaps adjustment

      Torque limiter adjustment

-    SBC counter reset

-    Enable Video in Motion

-    Clear crash data from Bosch/Temic/TRW airbags up to 2010

MERCEDES-BENZ  TRUCK RANGE

Module scanning

Module Identification

Reading and clearing diagnostic fault codes

Live data monitoring

MITSUBISHI

Reading identification data

Reading and clearing fault codes DTCs (description of DTCs is available in multiple languages)

Scanning for available control units

Coding and adaptations

Displaying actual values (measured parameters)

Reading and programming flash Engine Control Units and output tests.

The following functionalities are also included in the online version of the software:

Full module identification

Connecting to the electronic modules

Reading of EDC15 engine control units (ECU)

PSA

Reading and clearing of Diagnostic Trouble Codes (DTCs)

Live values monitoring from all electronic modules and sensors using graph and table view

Actuator testing

Module identification

Change ID in BSI, Telematics, Airbag, MDS

Clear crash data in some Airbag modules by DUMP (offline)

Change VIN in the BSI (does not include 2015+ Continental and 2016+ Delphi BSIs), Telematic/Radio, Airbag

Change PIN in the BSI and make the BSI virgin (current PIN must be known)

Key learning to all models if the PIN is known

Change Mode (customer/showroom) BSI 2015+

BSI backup/restore all config

BSI view/clear faults log (via ABRITES Diagnostics for PSA offline) and history logs

BSI service reset (via ABRITES Diagnostics for PSA offline)

Set PIN ELV in BSI (via ABRITES Diagnostics for PSA offline)

Verify/Set PIN in the Hands Free module in the BSI (via ABRITES Diagnostics for PSA offline)

Emergency start if the PIN is known for vehicles with mechanical key (via ABRITES Diagnostics for PSA offline)

PORSCHE

Module identification

Read/Clear DTCs

Live data display

Actuator testing

Key programming for Porsche models after 2010 - spare key and All Keys Lost (ZN002 PROTAG or ZN003 PROTAG V2 is required)

Coding options

Adaptation channels

HONDA

Module scanning - information on DTCs, Live Data (if available) and extended module identification

Vehicle identification - automatic vehicle model detection

Reading and clearing diagnostic trouble codes - shown in each module

Key programming for all vehicles up to 2022:

Spare key programming and All Keys Lost

TOYOTA/LEXUS

Module Identification

Scanning for Diagnostic Trouble Codes (DTCs)

Clearing DTCs

Live Data monitoring

Actuator tests

Coding functions

Electronic module special functions

Key programming for all vehicles produced up to 2018 (G-type keys (mechanical and smart keys) and H-type keys (only smart keys)

Key identification and cloning

Reset and subsequent reuse of smart keys (ZN002 PROTAG or ZN003 PROTAG V2 is also required)

VOLVO

Reading of identification data from all electronic control units

Reading and clearing DTCs

Display of actual values/live data

Service functions such as:

- Service reset

- Reset cylinder adaptations

- No speed limiter

- Change mode (normal, factory, transport, safety)

- And many more

Read Central Car Configuration

CHRYSLER/DODGE/JEEP

Reading and clearing of diagnostic trouble codes

Module detection

Module identification

Extended ID

Live data monitoring

Actuator testing

Scanning

Read/write Data Flash and Program Flash for EDC15C2 and EDC16CP31 ECUs

KIA/HYUNDAI

Full vehicle scan

Module identification

Reading and clearing of diagnostic trouble codes - with detailed information about the codes

Live data display

Actuator testing

Read the PIN Code from EDC15 and Kefico ECUs by dump

Instrument cluster calibration for instrument clusters with 93c56 EEPROM (2004-2008) - Accent, Vera Cruz, H1…

PIN code reading from a working key for all vehicles with mechanical keys and DST AES,  DST 80, or HITAG 2 transponders

PIN code reading for vehicles with an ECU with built-in immobilizer from the following brands: Kefico, Bosch EDC15/EDC16/EDC17, Delphi.

PIN by VIN calculator for ALL vehicles up to year 09.2007

Transmitter codes saving for ALL vehicles with mechanical keys

FORD

Reading and clearing of DTCs

Module identification

Extended module identification

Service interval reset

Actuator tests

Measured values

Airbag clear crash data and renew - RCM module with the following processor: XC23xx data flash for FORD/Mazda/JLR and Volvo, as well as TMS470 + EEPROM 25320/25640 for Ford/JLR

FIAT CHRYSLER AUTOMOBILES

Scanning all electronic modules

Reading and clearing diagnostic trouble codes

Data display

ECU-related procedures (identification and configuration)

Actuator tests in order to show the source of the faults

Key programming by OBDII

Transponders/Keys preparation by dump of Immobiliser

BCM – Read/Update ConfData by OBDII, PIN, component protection data

For models up to 2012

JAGUAR AND LAND ROVER

Module scanning

Reading and clearing diagnostic trouble codes for all modules,

Service functions

Spare key programming

ALL KEYS LOST key programming

Remote control and keyless programming for vehicles up to 2018!

Mileage calibration for models up to 2014

GENERAL MOTORS

Reading identification of modules

Reading/clearing fault codes

Scanning for devices

Data display

Measured values

Security code programming and vehicle identification number (VIN) programming

SUZUKI

Module identification

Reading and clearing diagnostic trouble codes

Live data monitoring

Actuator tests

SUBARU

Scan for units

Module identification

Read and clear diagnostic trouble codes

Temporary Diagnostic codes display

Memorized Diagnostic codes display

Current data display

Clear crash data

Monitor live data

TESLA

Scan the vehicle for all available electronic modules

Read and clear their respective DTCs (diagnostic trouble codes)

View live data 

Service functions:

  - Entering the parking brake in service mode

  - IBST VIN learn and reset

  - Test pedal offset

  - Dim central, left or right mirrors

  - Head Lamp communication test

  - HOMELINK communication test

  - Window calibration on all doors

  - NFC amplitude reading and many more

J1939 COMPLIANT VEHICLES

Module scanning

Reading diagnostic trouble codes in each module

Clearing diagnostic trouble codes

Monitoring live values

Freeze frame

On top of all the free functionality, there are many options that can be purchased separately giving access to a wide range of opportunities for every professional. These functionalities are available as software special functions available in our online shop and include:

-    Key programming – add a spare key or program keys in All Keys Lost situations

-    Module replacement – perform parts exchange, module renewal, module adaptation

-    PIN code reading – get information vital for key programming and module adaptation

-    Component security bytes reading – read bytes in order to adapt modules and learn keys

-    Cluster calibration – access the instrument cluster data

-    Engine Control Unit (ECU) programming – update the software to apply custom settings

AVDI is unrivalled in giving you the opportunity to work with nearly 100 % of the vehicles around the world, and OEM tools, as well. It is a tool unmatched in versatility, coverage and functionality. Get your AVDI now, and achieve the impossible!

AVDI is compatible with all Abrites diagnostic software:

Bikes, Snowmobiles, Water scooters, Heavy duty vehicles

BMW, Mini

Chrysler, Jeep, Dodge

DAF

Daihatsu

FCA - Fiat, Alfa Romeo, Lancia

Ford, Mazda

Hyundai, KIA

Jaguar, Land Rover

Mercedes, Smart, Maybach

Mitsubishi

Nissan, Infiniti

Opel, Vauxhall

Peugeot, Citroen

Renault, Dacia

Subaru

Suzuki

Tesla

Toyota, Lexus, Scion

VAG - Volkswagen, Audi, Seat, Skoda, Porsche

Volvo

SAE J2534 PassThru compliant driver:

Compatible with many 3rd party diagnostic software

VCI emulator which enables AVDI to emulate different interface units (e.g. K-line interface and ELM327 interface)

J2534 PassThru compatibility:

BMW - DIS over K-line and CAN bus

BMW - E-Sys, INPA, EDIABAS, NCS Expert, NFS over K-line and CAN bus

BMW Rheingold ISTA-P

BMW  

MINI    

Bombardier diagnostic software

Mercedes DAS/Xentry - Star Diagnosis

Mercedes    

Evinrude Diagnostics

Fiat EXAMINER

FCA  

Ford Scanner

FORD  

GM - Tech2Win, GDS2 and SPS diagnostic software

GM  

Honda/Acura HDS

HONDA    

Hyundai/KIA GDS

HYUNDAI  

KIA    

Jaguar Land Rover Symptom Driven Diagnostics (JLR SDD)

JAGUAR    

LAND ROVER    

Mitsubishi MUT3

Nissan Consult III+

NISSAN  

Land Rover/Jaguar IDS

Subaru Select Monitor III

SUBARU  

Suzuki/Yamaha Marine Diagnostics

Toyota/Lexus/Scion Techstream

TOYOTA    

LEXUS  

Volvo VIDA

VOLVO  

VW/Audi/Seat/Skoda/Bentley/Lamborghini ODIS

VW    

AUDI  

SKODA  

SEAT  

BENTLEY    

LAMBORGHINI    

Webasto TT

VCI emulator which enables AVDI to emulate different interface units (e.g. K-line interface and ELM327 interface)

 

Supporting external communication link with our transponder programmer - PROTAG

Supporting external communication link with our IC programmer - ABPROG

TÜV Rheinland certified

GS certified

Compliant with the following European Directives:

2004/108 / EC

2006/95 / EC

2011/65 / EU

2012/19 / EU

And meets the following safety norms: EN61010-1: 2010, EN61326-1: 2013.

Dimensions:

13x5x25 cm

Weight:

0,6 kg

K-line ISO 9141 (100 mA) multiplexed to 24 different pins of the diagnostic connector

ISO14230 compliant

SAE J1850 VPW, PWM compliant (additional adapter required)

Single wire CAN bus multiplexed to different pins of diagnostic connector

Dual wire low speed CAN bus multiplexed to different pins of diagnostic connector

Dual wire high speed CAN bus multiplexed to different pins of diagnostic connector

CAN bus GMLAN,  ISO14229, ISO15765, J1939, ISO22901 compliant

Analog Input USB interface to the PC Supply voltage 8..30V DC OBDII cable

Updatable firmware

 

FULL LIST OF BASIC AVDI FUNCTIONALITIES:

BUDS

BR002 - VCINPL B.U.D.S

CHRYSLER

CR007 - Engine Control Unit Flash Manager

Read/write Data Flash and Program Flash for EDC15C2 and EDC16CP31 ECUs

FIAT

FN007 - Transponder Maker

FN008 - Key Learning

FN011 - BCM Read/Update

FN012 - BCM and Key Manager

FORD

FR009 – Airbag

Airbag clear crash data and renew - RCM module with the following processor: XC23xx data flash for FORD/Mazda/JLR and Volvo, as well as TMS470 + EEPROM 25320/25640 for Ford/JLR

JLR

JL002 - Key Learning

JL003 - Cluster Calibration

JL004 - Key Learning (DPLA, FK72, HPLA)

MERCEDES/MAYBACH/SMART

Mercedes Online- CPC modifications by OBDII - VMAX limiter removal/ Exhaust flaps adjustment/ Torque limiter adjustment

SCN coding completely by OBDII by using Mercedes Online (no Xentry online account is required)

MN002 - Cluster Calibration by OBD (K-Line), Assyst Plus ( Mileage calibration – both SAM module and instrument cluster)

MN003 – Airbag (Clear crash data from Bosch/Temic/TRW airbags up to 2010)

MN004 - TV/AUX, Seatbelt, Reverse warning, Gulf states (Enable Video in Motion – either by using Mercedes Offline or Mercedes Online)

MN005 - Key Programming, Immo read/update (Key programming by dump (DAS 2/2a/2b)

MN006 - ECU Read/Update Flash

MN007 - CGW (Central Gateway) Read/Update ConfData (SOFTOUCH activation - switching from semi-automatic to automatic transmission), Gearbox adaptation

MN008 - SMART Key Learning, Emergency start – models 451, 454 ( Key programming – models 450, 451, 452, 454 ), Cruise control activation

MN009 - Cluster Calibration for SMART after 2007

MN010 - Cluster Calibration for S-Class W221/CL W216 and Sprinter, Vito, Viano (after 2006)

MN011 - CAN Dash Cluster Calibration - W211, W219, W164, W251, W203...

MN012 - Cluster Calibration - Mercedes, Smart

MN013 – Airbag – clear crash data

MN014 - Cluster Calibration in Dash in SMART 2007+ and in SAM module (451)

MN015 - Cluster Calibration - Mercedes

MN016 - Cluster Calibration for W204/W212/W207/W197/X204/w218

MN017 - Cluster Calibration for W220/W215; Read/Update ConfData of W220/W215/W169/W245/W221/W216 (Reflashing and renewal of SAM module and SAM/ECM synchronisation), Cluster calibration and adaptation for vehicles up to 2014

MN018 - Key Learning (DAS2, DAS2A, DAS2B, DAS3), Virgin ECU, SBC Repair (SBC counter reset), Repair Start Error

MN019 - Electronic Transmission Control (722.9) and ISM renew ( 7-G Tronic Databse for TCU reflashing)

MN020 - Instrument Cluster Data Manager ( Mileage calibration )

MN021 – TV (TV In Motion), ECU, Airbag Manager

MN028 - Instrument Cluster Data Manager, TV (TV In Motion), ECU, Airbag Manager

MITSUBISHI

MI003 - ECU Read/Update Flash - Reading of EDC15 engine control units (ECU)

MI005 - Electronic Control Unit reprogramming ( EDC15 engine control units (ECU) reprogramming)

OPEL

ON007 - Tech2Win Driver

RENAULT

RR002 - Key learning

RR003 - ClioIII, Modus, MasterIII, Logan, Traffic

RR005 - Key learning

RR006 - Megane III key learning

RR007 - Updated SW key learning

RR008 - Clio IV key learning

RR010 - Clio IV key learning

RR012 - Twingo III key learning

RR015 - Smart 453 key learning

TOYOTA

TN004 - Key Programming ( )

TN005 - Advanced diagnostic functionality. Key programming (Immo Box – mechanical keys – requires ZN039-2)

TN006 - Advanced key programming by diagnostics (Smart Key programming – requires ZN039-2)

TN007 - Advanced diagnostic functionality and key programming (Smart Keys programming for models up to 2016/2017)

VAG

AN002 - Cluster CAN - Calibration

AN003 - Cluster PIN-CAN - Calibration

AN004 - Immo panel – Read PIN

AN005 - Immo panel EDC16 - Read PIN&CS

AN006 - Cluster K-Line - Calibration

AN007 - ECU ConfData – Read ECU EEPROM

AN008 - Flash Counters

AN010 - Airbag ConfData – Airbag reset

AN011 - TV Configuration – TV in motion

AN012 - EDC16 calibration – mileage in ECU

AN014 - EDC17 PIN – Read Immo Data PIN&CS from ECU

AN015 - Flash Memory ECU – by OBD

AN018 - Dealer key learning Q7- spare key (2006 - 2008)

AN019 - Prepare Dealer Key Q7 – spare key (2006 - 2008)

AN021 - ME7 ConfData – read and write ECU EEPROM all by OBD

AN023 - VW Crafter – Read/Write ECU ConfData, Key learning, ECU and Immobilizer Diagnotics, Remote Control Diagnostic, ECU ConfData in Direct Mode, ECU Adaptation (Autodetect/Manually enter ECU PIN/CS)

AN024 - Key learning for EDC16 models – If PIN and CS are known

AN025 - EDC16/MED9/Simos PIN/CS – Read Immo Data

AN026 - Dealer key learning

AN027 - Q7 2008+

AN028 - Cluster CAN UDS

AN029 - IMMO Data Immobiliser/ECU

AN030 - Key Adaptation (All VAG Models)

AN031 - Dealer Key Preparation – Models up to 2012

AN032 - Security code by CAN

AN033 - ECU ConfData (EDC15, ME7.x.x) – Read ECU EEPROM by OBD

AN034 - Cluster - PIN/Calibration – K-Line – Mileage for all Models up to MY 2006

AN036 - Airbag (K-Line/CAN) – Airbag reset for models up to MY 2008

Other functionalities already included in AVDI Base for VAG:

- Diagnostic channel adaptations

- Key programming by channel if the PIN is known (done in diagnostics in Instrument Cluster)

- Guided functions for ECU, Instrument cluster, Navigation, Steering wheel, Electronic parking brake, Telephone, Comfort module and Body Control Module (enable/disable)

- Enable video in motion for MMI 2G and 3G

- Steering lock adaptation (done in diagnostics on a separate channel)

- 7-digit to 4-digit PIN conversion

- DPF remove by DUMP – EDC16 (checksum needed), EDC17

- Key Programming, Mileage Calibration and module replacement for all VAG Immo III and III+ vehicles