ZN040 - A6/A7/A8 CAN Adapter

ZN040 - A6/A7/A8 CAN Adapter

ZN040

The ZN040 adapter is used when performing All Keys Lost procedures for Audi A6/A7/A8 2011+ with BCM2.

The adapter provides all necessary connections:

CAN separator – used for connection to the internal CAN-BUS of the vehicle for reading the ECU and TCU

LIN connector (green wire) – used for connection to the internal LIN-BUS of the vehicle for reading the ELV

OBDII connector – used to force the IGN ON

B+ connector (yellow wire) – used for connection to B+ when reading the ECU and TCU through the CAN separator

GND connector (black wire) – used for connection to GND when reading the ECU and TCU through the CAN separator

An AVDI interface and VN003 are required to use this adapter.

ZN040

Data sheet

Brand
Audi
Manufacturers
Abrites
Device type
Cable

16 other products in the same category: